SIEMENS西门子 SCALANCE XC116交换机 6GK5116-0BA00-2AC2

          Severity ErrorFacilitylocal0标准 IEC 62443-3-3 参考：SR 1.2限制并发会话的数量消息文本 {Protocol}: Themaximum number of {Max sessions} concurrent loginsessionexceeded.示例 WBM / UDP / TCP / Telnet / SSH / Console / PNIO / PB /OPC: The maximumnumber of 10 concurrent login sessions exceeded.说明已经超出了并行会话的Zui大数目。Severity WarningFacility local0标准 IEC 62443-3-3Reference: SR 2.7检查信息保护{Protocol}: User {User name} has cleared thelogging buffer.示例 SSH: User admin has cleared the logging buffer.说明用户已删除本地日志。在本示例中，用户“admin”已删除本地日志。Severity NoticeFacility local0标准IEC 62443-3-3 参考：SR 3.9不可否认性{Protocol}: User {User name} haschanged the configuration.示例 SSH: User admin has changed theconfiguration.说明 用户已更改组态。在本示例中，用户“admin”已更改组态。Severity InfoFacilitylocal0标准 IEC 62443-3-3 参考：SR 2.12附录 ASCALANCEXB-200/XC-200/XF-200BA/XP-200/XR-300WG Web Based ManagementV4.3.1444 配置手册, 11/2021, C79000-G8952-C360-13消息文本 {Protocol}: User{User name} has deactivated \Config detail}configuration.示例 WBM /UDP / TCP / Telnet / SSH / Console / PNIO / PB / OPC: User adminhasdeactivated OpenVPN configuration.说明 用户已禁用特定组态数据。SeverityInfoFacility local0标准 IEC 62443-3-3 参考：SR 2.12{Protocol}: User{User name} has initiated a reset to factory defaults.示例 SSH: Useradmin has initiated a reset to factory defaults.说明用户已发起复位为默认设置的操作。在本示例中，用户“admin”已发起复位为默认设置的操作。Severity InfoFacilitylocal0标准 IEC 62443-3-3 参考：SR 2.12消息文本 Device configurationchanged.示例 Device configuration changed.说明 设备组态已yongjiu性更改。SeverityInfoFacility local0标准 IEC 62443-3-3 参考：SR2.12通信完整性{Protocol}:Integrity verification failed.示例 Console: Integrity verificationfailed.说明 检查消息的通信完整性时检测到完整性故障。只能进行基于证书的通信。Severity ErrorFacilitylocal0标准 IEC 62443-3-3 参考：SR 3.1附录 ASCALANCEXB-200/XC-200/XF-200BA/XP-200/XR-300WG Web Based ManagementV4.3.1配置手册, 11/2021, C79000-G8952-C360-13 445软件和信息完整性Firmwareintegrity verification failed. Backup firmware started.示例 Firmwareintegrity verification failed. Backup firmware started.说明检查固件完整性时检测到完整性故障。加载了备份固件。Severity ErrorFacility local0标准 IEC62443-3-3 参考：SR 3.4消息文本 {Protocol}: Software integrity verificationfailed.示例 WBM: Software integrity verification failed.说明检查软件完整性时检测到完整性故障。Severity ErrorFacility local0标准 IEC 62443-3-3参考：SR 3.4消息文本 Integrity violations in configuration data detected示例Integrity violations in configuration data detected说明检查组态完整性时检测到完整性故障。Severity ErrorFacility local0标准 IEC 62443-3-3参考：SR 3.4会话完整性{Protocol}: Session ID verification failed.示例 WBM:Session ID verification failed.说明 会话 ID 无效。Severity ErrorFacilitylocal0标准 IEC 62443-3-3 参考：SR 3.8附录 ASCALANCEXB-200/XC-200/XF-200BA/XP-200/XR-300WG Web Based ManagementV4.3.1446 配置手册, 11/2021, C79000-G8952-C360-13防御 DoS 攻击{Protocol}:Denial-of-Service (DoS) attack detected.示例 Console:Denial-of-Service (DoS) attack detected.说明 检测到拒绝服务 (DoS) 攻击SeverityAlertFacility local0标准 IEC 62443-3-3 参考：SR 3.8在自动系统中备份数据消息文本{Protocol}: User {User name} created backup file.示例 WBM / UDP / TCP/ Telnet / SSH / Console / PNIO / PB / OPC: User maiercreatedbackup file.说明 用户已创建备份文件。Severity NoticeFacility local0标准 IEC62443-3-3 Reference: SR 7.3消息文本 {Protocol}: User {User name} failedto create backup file.示例 WBM / UDP / TCP / Telnet / SSH / Console /PNIO / PB / OPC: User