① 系统垂直安装② 系统水平安装下表给出了通道组态为“3个输入,13个输出”时每个负载组的标准化总电流计算。在附录中提供模块在安装轨道上的尺寸图,以及带前面板的尺寸图。务必遵守在控制柜、控制室等地方安装时的具体尺寸要求。参数数据记录B可以在 RUN 模式下编辑模块参数。 WRREC 指令用于将参数传送到使用数据记录 128的模块中。如果在使用WRREC指令传送或验证参数期间发生错误,模块将使用之前的参数分配继续操作。相应的错误代码随后将写入 STATUS 输出参数。如果未发生错误,STATUS输出参数将包含实际传送数据的长度。有关 WRREC 指令的说明和错误代码,请参见 STEP 7 在线帮助(TIA Portal)。数据记录的结构下表给出了 TM Timer DIDQ 16x24V 的数据记录 128 的结构。 字节 0到字节 3中的值是固定的且不可更改。下表给出了可以在相应数字量输入的通道参数中进行设置的计数属性。
硬件使能(HW 使能)可以通过使能输入为工作模式“TimerDI”和“Timer DQ”使用硬件使能。可通过相应通道参数的位 4 设置硬件使能。可以为以下输入和输出设置硬件使能:表格 B- 3硬件使能选项数字量输入/数字量输出 设置硬件使能的数字量输入...DI0 或 DQ0 DI1DI2 或 DQ2 DI3DI4 或DQ4 DI5DI6 或 DQ6 DI7使用使能输入“工作模式”和“反转”信号输入的通道参数设置硬件使能:表格 B- 4使能输入设置选项工作模式 “反转输入信号”设置为...0 1Oversampling(0010B)通过高电平设置硬件使能通过低电平设置硬件使能Timer DI (0000B) 仅使用 SIMOTION 控制系统时工艺模块 TM Timer DIDQ16x24V (6ES7552‑1AA00‑0AB0)72 设备手册, 08/2014,A5E34078542-AA输入滤波器以下总览显示了可以针对数字量输入的特定工作模式进行设置的输入滤波器:表格 B- 5输入滤波器设置选项数字量输入的工作模式 输入滤波器的类型 可分配值• Timer DI (0000B)• Oversampling(0010B)输入延迟 • 无• 0.05 ms• 0.1 ms• 0.4 ms• 0.8 ms• 计数器 (0011B)•增量编码器(A、B相移)(0100B)滤波频率 50 kHz(无法更改)工艺模块 TM Timer DIDQ 16x24V(6ES7552‑1AA00‑0AB0)设备手册, 08/2014, A5E34078542-AA 73Open SourceSoftwareC经销商须知:为避免经销商或买主违反许可证条件,必须将此处提供的说明和许可证条件传递给买主。开源软件以及其它授权软件的许可证条款和免责声明下列开源软件以及“SIMATICS7-1500, ET200MP的数字量模块、模拟量模块、工艺模块、通信模块和电源模块”中的其它授权软件需以未经修改或经我们修改的形式进行使用,SiemensAG版权所有,2013-2014(以下称为“产品”)。对开源软件承担的责任“开源软件”免费提供。我们将遵照“产品”的适用许可证条款对“产品”以及其中所包含的“开源软件”承担相应责任。但明确排除在“产品”专用程序流程之外使用“开源软件”时的一切责任。此外,对于对“开源软件”进行修改所造成的缺陷,我们也不承担任何责任。“产品”一经修改,我们即不再对其提供任何技术支持。请阅读“开源软件”和其它授权软件的许可证条款和版权信息:ComponentOpen SourceSoftware[Yes/No]AcknowledgementsCopyright Information/FileDinkumware C/C++Library - 5.01NO LICENSEANDCOPYRIGHTINFORMATION FORCOMPONENTDINKUMWARE C/C++LIBRARY -5.01工艺模块 TM Timer DIDQ 16x24V (6ES7552‑1AA00‑0AB0)74 设备手册, 08/2014,A5E34078542-AAComponent OpenSourceSoftware[Yes/No]AcknowledgementsCopyright Information/FileGNU GCC libstdc++/ libsupc++ - 4.4.1YES LICENSEANDCOPYRIGHTINFORMATION FORCOMPONENT GNUGCC LIBSTDC++ /LIBSUPC++ -4.4.1libgcc - 4.4.1 YES LICENSE ANDCOPYRIGHTINFORMATIONFORCOMPONENTLIBGCC - 4.4.1Commercial Software: Dinkumware C/C++Library - 5.01Enclosed you'll find the license conditions andcopyright notices applicable forCommercial Software DinkumwareC/C++ Library - 5.01工艺模块 TM Timer DIDQ 16x24V(6ES7552‑1AA00‑0AB0)设备手册, 08/2014, A5E34078542-AA 75Licenseconditions:1 Copyright (c) 1991-1999 Unicode, Inc. All Rightsreserved. This file is provided as-isby Unicode, Inc. (The UnicodeConsortium).No claims are made as to fitness for anyparticularpurpose. Nowarranties of any kind are expressed or implied.Therecipientagrees to determine applicability of informationprovided. If thisfile has beenprovided on optical media by Unicode,Inc., the soleremedy for any claim will beexchange of defectivemedia within 90days of receipt.Unicode, Inc. hereby grantsthe rightto freely use the informationsupplied in this file in the creationof productssupporting theUnicode Standard, and to make copies ofthis file in any formforinternal or external distribution as longas this notice remainsattached.2 © Copyright William E. Kempf 2001Permission to use, copy, modify, distribute andsell this softwareand its documentation for any purpose is hereby granted withoutfee,provided that the above copyright notice appear in all copies andthat both thatcopyright notice and this permission notice appear insupporting documentation.William E. Kempf makes no representationsabout the suitability of this software forany purpose. It isprovided "as is" without express or implied warranty.3 Copyright ©1994 Hewlett-Packard CompanyPermission to use, copy,modify,distribute and sell this software and its documentation forany purpose is herebygranted without fee, provided that the abovecopyright notice appear in all copiesand that both that copyrightnotice and this permission notice appear insupportingdocumentation. Hewlett-Packard Company makes norepresentations about thesuitability of this software for anypurpose. It is provided ``as is'' without express orimpliedwarranty.Copyrights:copyright 1992 - 2006 by p.j. plauger and jimbrodie. all rights reserved.copyright 1992-2006 by p.j. plauger.all rights reserved.ipcopyright 1992-2006 by p.j. plauger. portionsderived from work copyright 1994 byhewlettpackard company. allrights reservedCopyright 1992-2006 by dinkumware, ltd. all rightsreservedcopyright 1992-2006 by dinkumware, ltd. portions derivedfrom work copyright 2001 bywilliam e. kempf. all rightsreservedcopyright 1994 hewlettpackard companycopyright 1994 byhewlettpackard companycopyright william e. kempf 2001工艺模块 TM TimerDIDQ 16x24V (6ES7552‑1AA00‑0AB0)76 设备手册, 08/2014,A5E34078542-AAcopyright 1989-2006 by p.j. plauger. all rightsreservedcopyright (c) by p.j. plauger. all rightsreserved.copyright (c) by dinkumware, ltd. all rightsreserved.copyright (c) unicode, inc. all rights reserved.(c)copyright william e. kempf 2001copyright (c) hewlettpackardcompanycopyright (c) by p.j. plauger. all rights reserved.copyright2006 by dinkumware, ltd.copyright (c) by p.j. plauger, licensed bydinkumware, ltd. all rights reserved.the dinkum cec++ libraryreference is copyright (c) by p.j. plauger. this code isprotectedby copyright. all rights reserved.the dinkum cc++ libraryreference is copyright (c) by p.j. plauger. this code isprotectedby copyright. all rights reserved.dinkum compleat library,vc++ package (vc++ compilers only) the dinkum compleatlibrary andthe dinkum compleat library reference are copyright (c) by p.j.plauger. allrights reserved.Open Source Software: GNU GCC libstdc++/ libsupc++ - 4.4.1Enclosed you'll find the license conditions andcopyright notices applicable for OpenSource Software GNU GCClibstdc++ / libsupc++ - 4.4.1工艺模块 TM Timer DIDQ 16x24V(6ES7552‑1AA00‑0AB0)设备手册, 08/2014, A5E34078542-AA 77Licenseconditions:1 LicenseThere are two licenses affecting GNU libstdc++:one for the code, and one for thedocumentation.There is a licensesection in the FAQ regarding common questions. If you havemorequestions, ask the FSF or the gcc mailing list.The Code: GPLThesource code is distributed under the GNU General Public Licenseversion 3,with the addition under section 7 of an exceptiondescribed in the “GCC RuntimeLibrary Exception, version 3.1” asfollows (or see the file COPYING.RUNTIME):GCC RUNTIME LIBRARYEXCEPTIONVersion 3.1, 31 March 2009Copyright (C) 2009 Free SoftwareFoundation, Inc.Everyone is permitted to copy and distributeverbatim copies of thislicense document, but changing it is notallowed.This GCC Runtime Library Exception ("Exception") is anadditionalpermission under section 7 of the GNU General PublicLicense, version3 ("GPLv3"). It applies to a given file (the"Runtime Library") thatbears a notice placed by the copyrightholder of the file stating thatthe file is governed by GPLv3 alongwith this Exception.When you use GCC to compile a program, GCC maycombine portions ofcertain GCC header files and runtime librarieswith the compiledprogram. The purpose of this Exception is to allowcompilation ofnon-GPL (including proprietary) programs to use, inthis way, theheader files and runtime libraries covered by thisException.工艺模块 TM Timer DIDQ 16x24V (6ES7552‑1AA00‑0AB0)78 设备手册,08/2014, A5E34078542-AA0. Definitions.A file is an "IndependentModule" if it either requires the RuntimeLibrary for executionafter a Compilation Process, or makes use of aninterface providedby the Runtime Library, but is not otherwise basedon the RuntimeLibrary."GCC" means a version of the GNU Compiler Collection, withor withoutmodifications, governed by version 3 (or a specifiedlater version) ofthe GNU General Public License (GPL) with theoption of using anysubsequent versions published by theFSF."GPL-compatible Software" is software whose conditions ofpropagation,modification and use would permit combination with GCCin accord withthe license of GCC."Target Code" refers to outputfrom any compiler for a real or virtualtarget processorarchitecture, in executable form or suitable forinput to anassembler, loader, linker and/or executionphase. Notwithstandingthat, Target Code does not include data in anyformat that is usedas a compiler intermediate representation, or usedfor producing acompiler intermediate representation.The "Compilation Process"transforms code entirely represented innon-intermediate languagesdesigned for human-written code, and/or inJava Virtual Machine bytecode, into Target Code. Thus, for example,use of source codegenerators and preprocessors need not be consideredpart of theCompilation Process, since the Compilation Process can beunderstoodas starting with the output of the generators orpreprocessors.ACompilation Process is "Eligible" if it is done using GCC, aloneorwith other GPL-compatible software, or if it is done withoutusing anywork based on GCC. For example, using non-GPL-compatibleSoftware tooptimize any GCC intermediate representations would notqualify as anEligible Compilation Process.工艺模块 TM Timer DIDQ 16x24V(6ES7552‑1AA00‑0AB0)设备手册, 08/2014, A5E34078542-AA 791. Grant ofAdditional Permission.You have permission to propagate a work ofTarget Code formed bycombining the Runtime Library with IndependentModules, even if suchpropagation would otherwise violate the termsof GPLv3, provided thatall Target Code was generated by EligibleCompilation Processes. Youmay then convey such a combination underterms of your choice,consistent with the licensing of theIndependent Modules.2. No Weakening of GCC Copyleft.Theavailability of this Exception does not imply anygeneralpresumption that third-party software is unaffected by thecopyleftrequirements of the license